CerMark LMM-6000 Laser Metal Marking Solution Black 250 grams

CerMark LMM-6000 Metal Marking Solution - Black - 250 grams. CerMark LMM 6000 coating creates permanent black laser marks on hard metal types such as Stainless Steel.

CerMark LMM 6000 will work with CO2 lasers with 30 or more watts of power and fiber lasers that can reach a frequency of 200 kHz. LMM 6000 will work on some aluminum grades but much slower marking speed is required. LMM 6000 is NOT recommended for Chrome or softer metals like Brass, Copper and Pewter.

CerMark LMM 14 is recommended for chrome and softer metals. For best results apply with an air brush.

A foam brush should be used if not spraying. LMM-6000 is formulated thick to prevent settling. It may be necessary to thin the paste before using.

We recommend thinning with ethanol, denatured alcohol, acetone or methyl ethyl ketone (MEK). Isopropyl rubbing alcohol should be avoided. Application method will determine how much you need to thin LMM-6000.

---